Next, tap the View Networks button, then select your home network from the list of available networks. Use the numbers from the Envoy's network you joined earlier or find the Envoy’s serial number either on the bottom or the back of the unit. You’ll be prompted to enter the password for the Envoy, which is the last six digits of the Envoy’s 12-digit serial number. Scroll down to the Monitoring section and tap the Wi-Fi row. The app will display the Envoy’s home screen. You will use these numbers in a later step.)Īfter you’ve confirmed that your mobile device is connected to the Envoy’s wireless network, launch the MyEnlighten app. The name will include the last six digits of the Envoy serial number.

Go to your mobile device’s Wi-Fi Settings screen and connect to the Envoy’s wireless network. Once you’ve enabled AP mode on the Envoy, it begins to broadcast a wireless network that you can join. This functionality is not available on Envoys manufactured prior to the launch of the Envoy-S. The LED will turn green, indicating that the Envoy is in AP Mode.

To turn on this network, enable the Envoy’s AP Mode (AP stands for “Access Point”).īriefly press the AP Mode button on the face of the Envoy. Download the app to your mobile device to begin.įirst, you’ll need to connect your mobile device to a wireless network created by the Envoy. Use the MyEnlighten mobile app (available for iOS and Android) to reset the password on your Envoy. (Using WPS is the simplest way to get your Envoy reconnected.) Otherwise, continue with the instructions below.

If your router supports WPS functionality (Wi-Fi Protected Setup), skip to the steps on the page here.

Wifi password recovery serial